Hard Wired Key Switches

These momentary switches can be used to lock and secure the operation of any tubular motorized unit. Available in surface mount or flush mount, comes with two sets of keys, and can be integrated with West Shore Shade’s wall mount receiver and all other West Shore Shade electronics.

Momentary Switch

For precision opening or closing of your shutter, screen or shade by holding up or down switch and releasing at desired height.

Maintain Switch

For continued opening or closing of your shutter, screen or shade to the next preset stop with a single touch.

Mini Receivers

This high tech product conveniently tucks into any space and works as both a junction box and an external buffer between the motor and the power source, providing an additional layer of protection against power surges or spikes. It has been designed to mount inside of the hood assembly, wires facing downward and to communicate effectively with all West Shore Shade remote controls. With a frequency of 433.92 Mhz, a 160 ft. / 50 meter transmission range* and weather resistance, the Mini Receiver accommodates all styles and series of tubular motors. There are 12 volt, 110 volt and 220 volt versions that are compatible with all West Shore Shade motors.

Wall Mount Receiver

Single Channel Wall Mount, hard-wired Convenient single button control directly on the receiver, or integrate with remote transmitter and/or key-switch to lock and secure your system.

Home Automation System Interface

• With the Home Automation System Interface, your West Shore Shade Electronics can communicate directly with your home automation system, such as Control 4 and Crestron, increasing the flexibility of control for your system from a central control unit, over the internet or from a cell phone app.
• The West Shore Shade Universal RF-Interface is used to integrate third party home automation systems, such as Control 4 & Crestron, with West Shore Shade’s RF motors and receivers
• Operated via RS232 serial communication.  After a RS232 input signal is received a RF signal will be sent to programmed devices
• Devices can be operated in groups or in single mode
• Integrates with West Shore Shade’s full line of electronics for complete automation of your screen and awning systems, hurricane and security shutters, and interior shading.

4 Channel Motor Synchronizer

• Allows up to 4 motors to be controlled using one hard-wired momentary switch. All motors will operate in the same direction simultaneously without electronic interference from the limits. The synchronizer eliminates crossed signals when connecting multiple motors to a single switch, allowing advanced configurations.

Power Distributor Board

• Powers up to 10 DC motors